Frequency Response:
20Hz to 20kHz +/- 0.1dB
THD +N:
-127.5dB (AWT)
Channel Separation:
>125dB @ 1kHz
Dynamic Range:
127.5dB (AWT)
Headphone Output:
1% THD 6.8v RMS with 300Ω (154mW)
1% THD 6.8v RMS with 33Ω (1.4w)
Output Impedance:
0.055Ω (short circuit protected)
Operating voltage:
90v AC – 250v AV auto switching 50Hz – 60Hz
Dimensions (including connectors):
7.8cm (H) 33.5cm (W) 15.2cm (D)
Weight:
5kg
Dynamic range: 127dB ‘A’ weighted
Noise: 4 uV ‘A’ weighted (high gain), 1.7 uV ‘A’ weighted (low gain) with no measurable noise floor modulation
Distortion: 0.00008% @ 2.5 V 300Ω; 0.00016% @ 6 W 8Ω
Output power (unbalanced): (@1% THD) 288 mW RMS 300Ω; 7.3 W RMS 8Ω
Output power (balanced): (@1% THD) 1.15 W RMS 300Ω; 18W RMS 8Ω
Output impedance: 0.042Ω
Stereo separation: 9 V RMS 300Ω -138dB
Dimensions: 5.2cm (H) 23.5cm (W) 23.8cm (D)
Output power | Balance out 2,000mWx2/40Ω, 800mWx2/600 Unbalance out 1,000mWx2/40Ω, 240mWx2/600Ω |
THD+N | Balance out 0.004%, unbalance out 0.004%, 1kHz |
Input signal , impedance | 1Vrms, 47kΩ for CH1 and CH-2 |
Frequency response | 10Hz – 120kHz -1.5dB |
AC power | AC100V -120V (50/60Hz) 40W for Japan and USA model AC220V – 240V 40W for Europe and Asia countries model |
Size | W260mm X D250mm x H100mm |
Weight | 3.5kg |
Gain (user-selectable) | 0dB, 9dB and 18dB | ||
Frequency Response | 0.5Hz to 500kHz(-3dB) | ||
THD & N | Balanced | Solid-State Tube Tube+ |
0.0015% 0.002% 0.012% |
Single- Ended | Solid-State Tube Tube+ |
0.005% 0.005% 0.2% |
|
SNR | Balanced Single-Ended |
>147dB(A) > 137dB(A) |
|
Output Power | Balanced Single-Ended |
>14,000mW (@ 16) >4,800mW (@ 16) |
|
Output Voltage | Balanced Single-Ended |
>23V (@ 600) >11.5v (@ 600) |
|
Input voltage (Pro iDSD Signature) | DC 9V/6.7A – 18V/3.35A | ||
Input voltage (iPower Elite) | AC 85 – 265V, 50/60Hz | ||
Power consumption | < 22W idle, 50W max | ||
Dimensions | 213 x 193 x 63 mm 6.2″ x 3.9″ x 1.4″ |
||
Net weight | 1.93 kg 4.3 Ibs |
Inputs: | |
Digital | USB3.0 B (USB2.0 compatible); S/PDIF (coaxial/optical) |
Bluetooth 5.4 (aptX Lossless, aptX Adaptive, aptx, LDAC, HWA/LHDC, AAC and SBC) | |
Analogue | UnBAL 3.5mm |
Clock: | External Sync Clock 10MHz, 1Vpp nominal, 75Ω. Sinewave or Squarewave |
Format: | PCM 768kHz; DSD 512 (22.6MHz); MQA Full Decoder |
Line Section | |
Outputs: | |
Balanced XLR | 19.5V max. (variable) 4.4V fixed |
UnBAL RCA | 10.5V max. (variable) 2.2V fixed |
Output Impedance: | XLR ≤100Ω; RCA ≤50Ω |
SNR: | <-120dB(A) @ 0dBFS |
DNR: | >120dB(A) @ -60dBFS |
THD+N: | <0.0015% @ 0dBFS |
Headphone Section | |
Output: | |
Balanced 4.4mm | 3.5V / 19.5V max. (12Ω – 600Ω Headphone) |
UnBAL 6.3mm | 4.5V / 9.50V max. (12Ω – 300Ω Headphone) |
Output Power: | |
Balanced | >19.5V/650 mW (@ 600Ω); >13.3V/5,551 mW (@ 32Ω) |
UnBAL | >10.5V/184 mW (@ 600Ω); >9.5V/2,832 mW (@ 32Ω) |
Output Impedance: | <1Ω |
SNR: | >120dB(A) (3.3V 6.3mm/6.2V 4.4mm) |
DNR: | -120dB(A) |
THD + N: | <0.0015% (125mW @ 32Ω) |
Power supply requirement: | DC 9V/1.5A – 15V/0.9A (centre +ve)* |
Power consumption: | No Signal ~5W; Max Signal ~13.5W |
Dimensions: | 214 x 158 x 41 mm (8.4″ x 6.2″ x 1.6″) |
Net weight: | 916g (2.0 Ibs) |
頻率響應:5赫茲至200赫茲(-3分貝)
串音:-84 dB的(@ 1kHz時)
總諧波失真:0001%(@ 1kHz時,0 dBu的輸入電平與團結增益)
噪聲:-97 dBu的
動態範圍:129分貝(@ 600歐姆阻抗)
阻抗:20歐姆平衡
最大輸入電平:+24 dBu的
輸出輸入端
耳機輸出:6,35毫米立體聲的trs連接
引腳接線提示=左,右環=,豎井=接地
阻抗:10歐姆
功率
輸出性能:
1.7W(+32,2 dBm的)@ 1 kHz和600歐姆
只有360mW(+25,6 dBm的)@ 1 kHz和30歐姆
電源
電壓:230伏交流電,50Hz/120V交流,60赫茲
功耗:最大。 5,6瓦/
保險絲:200-240伏交流電:200 mA/100-120伏交流電:400馬
高x寬x深:95 × 210 ×315毫米
用高腳的高度:127毫米
深度與音量旋鈕:335毫米
重量:2.65千克
Line I/O: | 0 / 2 channels (sym XLR), 0 / 2 channels (unsym. RCA) |
SPDIF I/O: | 1 / 1 (RCA) |
AES / EBU I / O: | 1 / 0 (XLR) |
TOSLink I/O: | 1x Input |
Sample frequency: | max. 192 kHz |
Resolution: | 32 Bit |
Frequency response: | 4 Hz – 53 kHz (-0.5 dB) |
Input sensitivity: | 200 mV |
Input impedance: | 75 Ohm (SPDIF) _ 110 Ohm (AES/EBU) |
Output impedance: | < 1 Ohm |
max. output level: | +21 / +15 / +9 / +3 dBu (selectable) |
Signal to Noise Ratio (SNR): | 120 dB |
Crosstalk: | -125 dB |
Interface: | USB (optional) |
Extras: | optional USB interface available |
Power supply: | 230 V / 115 V AC |
Casing: | desktop |
Dimensions: | 168 x 49 x 145 mm (WxHxD) |
Mass: | 1.10 kg |
Technical details:
Output impedance < 0,1 ohm
Maximum output current 300 mA.
Maximum output voltage JAZZ 3.7 V
Maximum output voltage JAZZ-FF 15 V @ 200 Hz
Discrete volume control. Typical stepsize 1.4 dB, 31 steps.
Gain switch. Maximum gain factors +0 / +16 dB
Crossfeed filter switch:
1. Stereo / crossfeed OFF
2. Crossfeed ON
1 pair of analog inputs
Input impedance 18 kOhm
Gold-plated input jacks.
Silver plated headphone jack (Neutrik).
Silver plated heavy duty switches
10 Watts toroidal transformer.
110V and 220V mains power switchable.
Power uptake 5 Watts
Built-in groundloop breaker.
Double regulated voltage lines.
Low impedance electrolytic buffer capacitors (Nichicon). Total Buffer capacity 39.000 uF.
Bypass capacitors in the power supply.
Polystyrol and polypropylen capacitors in the signal path.
Metalfilm resistors in the signal path.
OPA209 opamps biased into class-A.
A total of 4 BURR-BROWN BUF634 buffer amplifiers at the left, the right, and the ground output channel.
Active balanced headphone ground.
Signal paths and signal path components at the bottom side of the PCB for maximal shielding.
Sturdy anodized aluminium enclosure
Weight: 1.0 kg
Size: 22.2 x 10.6 x 6.0 cm