Frequency Response:
20Hz to 20kHz +/- 0.1dB
THD +N:
-127.5dB (AWT)
Channel Separation:
>125dB @ 1kHz
Dynamic Range:
127.5dB (AWT)
Headphone Output:
1% THD 6.8v RMS with 300Ω (154mW)
1% THD 6.8v RMS with 33Ω (1.4w)
Output Impedance:
0.055Ω (short circuit protected)
Operating voltage:
90v AC – 250v AV auto switching 50Hz – 60Hz
Dimensions (including connectors):
7.8cm (H) 33.5cm (W) 15.2cm (D)
Weight:
5kg
Dynamic range: 127dB ‘A’ weighted
Noise: 4 uV ‘A’ weighted (high gain), 1.7 uV ‘A’ weighted (low gain) with no measurable noise floor modulation
Distortion: 0.00008% @ 2.5 V 300Ω; 0.00016% @ 6 W 8Ω
Output power (unbalanced): (@1% THD) 288 mW RMS 300Ω; 7.3 W RMS 8Ω
Output power (balanced): (@1% THD) 1.15 W RMS 300Ω; 18W RMS 8Ω
Output impedance: 0.042Ω
Stereo separation: 9 V RMS 300Ω -138dB
Dimensions: 5.2cm (H) 23.5cm (W) 23.8cm (D)
port: | USB 2.0 |
color: | black |
headphone Out: | 1 (bal., XLR 4-pole), 2 |
housing: | Desktop |
bit depth: | 32 Bit |
amplifier channels: | 2 |
sample rate: | max. 384 kHz |
dimensions: | 290 x 80 x 248 mm (W x H x D) |
型式:DAC
晶片:Chord Electronics客製化Xilinx Artix 7 (XC7A15T) FPGA晶片
Tap長度:49,152
Pulse array:10 element pulse array design
頻率響應:20Hz – 20kHz +/- 0.2dB
輸出級:Class A
THD: <0.0001% 1kHz 3v RMS 300Ω
THD與噪訊 (3v RMS): 117dB at 1kHz 300ohms ‘A’ wighted (reference 2.5v)
2.6 uV ‘A’ weighted 噪訊:底噪低於可偵測範圍
聲道分離度:138dB at 1kHz 300Ω
重量:770g
尺寸:41mm (H) x 160mm (W) x 72mm (D)
Item number: | 1008175 |
color | schwarz |
housing | Desktop |
power supply | Internal 230 V / 115 V AC |
headphone Out | 1 (Pentaconn, symmetrisch), 1x (4-pol. XLR, symmetrisch), 1x (6,3 mm Klinke, unsymmetrisch) |
Liberty DAC II規格 解碼:支援最高 32Bit / 768 kHz、原生 DSD512、DXD、MQA
輸入:USB 2.0 (OSX、Linux 不需驅動程式)、AES/EBU、同軸 x 2、光纖(192k PCM, DSD64 DOP)
輸出:XLR x 1 組 、RCA x 1組
耳擴:3W 300mA @ 0.1 ohms 阻抗 時鐘:少於 2ps Jitter 抖動
電源:60W 線性環牛供電(自動電壓切換)
體積:140 x 225 x 44 mm
重量:2kg
建議零售價:HKD 12,800
Inputs | Wi-Fi Ethernet (M12 X-code 8-pin/RJ45/Optical) USB-A and USB-C (front panel) (USB DISK, HDD etc.) |
Formats | DSD: up to 512 / 22.6MHz PCM: up to 768kHz MQA: Full Decoder |
Analogue output | Balanced 4.4mm 4V RMS / UnBAL RCA 2V RMS |
Digital output | USB-C (front panel) USB3.0 Type-A Socket x2 (USB2.0 compatible) S/PDIF Optical (PCM up to 192kHz, 24-bit) S/PDIF Coaxial (PCM up to 192kHz, 24-bit) AES/EBU (XLR – single link, PCM up to 192kHz) I2S via HDMI connector Pinout: 1) Data – 2) Gnd 3) Data + 4) Bck + 5) Gnd 6) Bck 7) Wck – 8) Gnd 9) Wck + 10) Mck + 11) Gnd 12) Mck 13,14,15,16) DSD Enable; L=PCM, H=DSD 17) Gnd 18) 5V Power Enable Output; L=O, H=On 19) N/C 20,21,22,23) GND |
Output Impedance | Balanced: ≤74Ω UnBAL: ≤37Ω |
SNR | <-106dB(A) @ 0dBFS (BAL/UnBAL) |
THD + N | <0.0025% @ 0dBFS (BAL/UnBAL) |
Power supply requirement | DC 9V/2.0A, 12V/1.8A, 15V/1.2A* (centre pin +) |
Power consumption | <0.5W idle, 14W max. |
Dimensions | 214 x 151 x 41 mm (8.4″ x 5.9″ x 1.6″) |
Net weight | 1.0 kg (2.26 Ibs) |
Limited Warranty | 12 months** |
*A power supply unit must be able to deliver minimum rated repetitive current **12 months typical or as permitted/required by local reseller laws. ***Specifations are subject to change without notice. |
1x pair Phono (stereo) (A1). Gain 3dB; 1.4Vrms in for 2Vrms out
1x 3.5mm analogue stereo (A2). Gain 12dB; 500mVrms in for 2Vrms out. Analogue inputs overload
capability >40dB
1x Asynchronous USB 2.0 interface, 44.1–192kHz ≤24-bit. Jitter <90ps p-p. Apodising filter and upsampling of 44.1/48kHz inputs to 88.2/96kHz; MQA decode and render
1x pair phono (stereo) preamp out. Maximum output 3.1Vrms @ 1kHz, THD <0.001% @ 1kHz up to 3V
rms. Crosstalk <–70dB @ 1kHz. Output can be disabled via power button
2x 1/4in A-type stereo phone jacks. Maximum output 3Vrms off load, THD <0.002%. Output impedance
<100mΩ. Power output 250mW up to 42Ω. Short-circuit protected
1x 3.5mm stereo phone jack. Max output 3Vrms off-load, THD <0.002%. Output impedance 2.2Ω
Inputs: | |
Digital | USB3.0 B (USB2.0 compatible); S/PDIF (coaxial/optical) |
Bluetooth 5.4 (aptX Lossless, aptX Adaptive, aptx, LDAC, HWA/LHDC, AAC and SBC) | |
Analogue | UnBAL 3.5mm |
Clock: | External Sync Clock 10MHz, 1Vpp nominal, 75Ω. Sinewave or Squarewave |
Format: | PCM 768kHz; DSD 512 (22.6MHz); MQA Full Decoder |
Line Section | |
Outputs: | |
Balanced XLR | 19.5V max. (variable) 4.4V fixed |
UnBAL RCA | 10.5V max. (variable) 2.2V fixed |
Output Impedance: | XLR ≤100Ω; RCA ≤50Ω |
SNR: | <-120dB(A) @ 0dBFS |
DNR: | >120dB(A) @ -60dBFS |
THD+N: | <0.0015% @ 0dBFS |
Headphone Section | |
Output: | |
Balanced 4.4mm | 3.5V / 19.5V max. (12Ω – 600Ω Headphone) |
UnBAL 6.3mm | 4.5V / 9.50V max. (12Ω – 300Ω Headphone) |
Output Power: | |
Balanced | >19.5V/650 mW (@ 600Ω); >13.3V/5,551 mW (@ 32Ω) |
UnBAL | >10.5V/184 mW (@ 600Ω); >9.5V/2,832 mW (@ 32Ω) |
Output Impedance: | <1Ω |
SNR: | >120dB(A) (3.3V 6.3mm/6.2V 4.4mm) |
DNR: | -120dB(A) |
THD + N: | <0.0015% (125mW @ 32Ω) |
Power supply requirement: | DC 9V/1.5A – 15V/0.9A (centre +ve)* |
Power consumption: | No Signal ~5W; Max Signal ~13.5W |
Dimensions: | 214 x 158 x 41 mm (8.4″ x 6.2″ x 1.6″) |
Net weight: | 916g (2.0 Ibs) |
Line I/O: | 0 / 2 channels (sym XLR), 0 / 2 channels (unsym. RCA) |
SPDIF I/O: | 1 / 1 (RCA) |
AES / EBU I / O: | 1 / 0 (XLR) |
TOSLink I/O: | 1x Input |
Sample frequency: | max. 192 kHz |
Resolution: | 32 Bit |
Frequency response: | 4 Hz – 53 kHz (-0.5 dB) |
Input sensitivity: | 200 mV |
Input impedance: | 75 Ohm (SPDIF) _ 110 Ohm (AES/EBU) |
Output impedance: | < 1 Ohm |
max. output level: | +21 / +15 / +9 / +3 dBu (selectable) |
Signal to Noise Ratio (SNR): | 120 dB |
Crosstalk: | -125 dB |
Interface: | USB (optional) |
Extras: | optional USB interface available |
Power supply: | 230 V / 115 V AC |
Casing: | desktop |
Dimensions: | 168 x 49 x 145 mm (WxHxD) |
Mass: | 1.10 kg |
Inputs:
1x Micro USB 768kHz/32-bit Capable Input
1x 3.5mm Jack Coaxial 768kHz/32-bit Capable Input
1x Optical TOSLINK 192kHz/24-bit Capable Input
1x 1amp Micro USB Charging Port Input
Output:
2x 3.5mm Headphone Jacks
Technical Specs:
Output Power @ 1kHz – 600Ω 35mW
Output Power @ 1kHz – 8Ω 720mW
Output Impedance: 75mOhms
Dynamic Range: 125dB
THD @ 3v: 0.00017%
Weight: 180g (0.4lbs)
Dimensions: 82mm (l) x 60mm (w) x 22mm (h)
SABRE32 Ultra DAC (ES9016S x 2)
USB輸入 (PCM):44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz (16, 24, 32bit)
USB輸入 (DSD):2.8MHz, 5.6MHz
同軸 / 光纖 / AEC / EBU輸入:32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz (16, 24bit)
非同步傳送 (Asynchronous Transfer) 減少Jitter
3種 數碼過濾模式 (SHARP / SLOW / SHORT)
Lock Range Adjust 功能可有效減低Jitter
音訊升頻 (最高至384kHz / 32-bit)
保護式變壓器 (Shield Power Transformer) 有獨立線圈,有效分隔電源、數碼及模擬部份
完全平衡 (Full Balanced) 線路設計可減低噪訊
分散式線路設計 (Discrete Circuit) 令音質處理質素提升
平衡耳機端子:XLR3 / XLR4 x 2
非平衡耳機端子:STD x 1
“Fine Adjust” 可作細微聲量調節
附有增益調校 (Gain Switch) 以切合不同阻抗的耳機
數碼隔離器 (Digital Isolator) 可減低因USB產生的雜訊
採用NEUTRIK平衡端子
XLR3 / RCA可作前級 (Pre-Amp) 功能
低重心設計配合堅固機箱增加穩定性
消耗功率:35W
尺寸 (闊 x 高 x 深):296 x 101 x 271 mm
重量 (kg):6.3kg
前置端子-耳機輸出:非平衡 (STD) x 1,平衡 (XLR3) x 1,平衡 (XLR4) x 1
後置端子-數碼輸入:USB (type B) x 1,同軸 x 2,光纖 x 2,AES/EBU (XLR3) x 1
模擬輸出:非平衡 (RCA) x 1,平衡 (XLR3) x 1 (附有輸出水平 Fix / Variable變換及相位變換)
Input |
|
Output |
|
Color |
|
Channel |
|
Class |
|
Amplifier chip |
|
Power (W) |
|
Remote Control |
|