Specifications
EC3
顏色:曜石黑、月光銀
解碼晶片:ESS Sabre ES9219C
支援格式:最高 384kHz PCM、DSD256
藍牙接收:LDAC、AAC、SBC
輸入端子:USB
輸出端子:3.5mm 耳機、光纖、同軸、RCA
最大輸出功率:70mW@32Ω(耳機)
總諧波失真:<0.0015%
體積:188 × 255 × 68mm
重量:約 2.4kg
Inputs | Wi-Fi Ethernet (M12 X-code 8-pin/RJ45/Optical) USB-A and USB-C (front panel) (USB DISK, HDD etc.) |
Formats | DSD: up to 512 / 22.6MHz PCM: up to 768kHz MQA: Full Decoder |
Analogue output | Balanced 4.4mm 4V RMS / UnBAL RCA 2V RMS |
Digital output | USB-C (front panel) USB3.0 Type-A Socket x2 (USB2.0 compatible) S/PDIF Optical (PCM up to 192kHz, 24-bit) S/PDIF Coaxial (PCM up to 192kHz, 24-bit) AES/EBU (XLR – single link, PCM up to 192kHz) I2S via HDMI connector Pinout: 1) Data – 2) Gnd 3) Data + 4) Bck + 5) Gnd 6) Bck 7) Wck – 8) Gnd 9) Wck + 10) Mck + 11) Gnd 12) Mck 13,14,15,16) DSD Enable; L=PCM, H=DSD 17) Gnd 18) 5V Power Enable Output; L=O, H=On 19) N/C 20,21,22,23) GND |
Output Impedance | Balanced: ≤74Ω UnBAL: ≤37Ω |
SNR | <-106dB(A) @ 0dBFS (BAL/UnBAL) |
THD + N | <0.0025% @ 0dBFS (BAL/UnBAL) |
Power supply requirement | DC 9V/2.0A, 12V/1.8A, 15V/1.2A* (centre pin +) |
Power consumption | <0.5W idle, 14W max. |
Dimensions | 214 x 151 x 41 mm (8.4″ x 5.9″ x 1.6″) |
Net weight | 1.0 kg (2.26 Ibs) |
Limited Warranty | 12 months** |
*A power supply unit must be able to deliver minimum rated repetitive current **12 months typical or as permitted/required by local reseller laws. ***Specifations are subject to change without notice. |
Specification
Dimensions: 252 x 188 x 67.5 mm
Weight: 3.2kg
Display: 5.8-inch 1920*1080 IPS Touch screen
System: Based on Android 10, Closed and Customized
Hi-Res Support: Up to PCM 32bit / 768 kHz & DSD512
Bluetooth: Version 5.0, serving as both Receiver and transmitter
BT codec support: Receiver LDAC & SBC // Transmitter LDAC, aptX-HD, aptX, SBC
Wi-Fi: Dual band 2.4G & 5G
DAC: ESS ES9038Pro
Analog Section: OPA1611 based I/V conversion, OPA2211 based LPF, OPA2211+BD139+BD140 based Amplifier
Analog outputs: 4.4mm & XLR balanced, 3.5mm & 6.35mm Single-ended, with pair of RCA and XLR
Digital outputs: SPDIF Coaxial & Optical, USB Audio Output
Digital inputs: USB-B, Coaxial SPDIF & Optical, 2x USB port for USB drives, MicroSD card slot
Output power Single Ended: Up to 8.5V / 2.3W @ 32 Ohm // 9V / 270mW @ 300 Ohm
Output power Balanced: Up to 15V / 7W @ 32 Ohm // 18V / 1W @ 300 Ohm
Output Impedance: 1.2 Ohm SE // 2.4 Ohm BAL
Balanced THD+N: 0.0003%
Balanced Dynamic Range: 125 dB
Balanced SNR: 125 dB
Balanced Channel separation: 104dB
Specification
System: Closed Customized Android, with build-in streaming apps
Display: Touch 4.7-inch HD
Power supply: Separated power for analog and digital section
Analog: Low noise Toroidal transformer
Digital: Switching power supply
Analog circuit:
AKM AK4493 DAC
OPA2211 as low pass filter*
2X TPA6120A2 for headphone output
2X Muse8920 for pre-amp output
3rd Generation FPGA
CPAF Filter technology
KDS Crystal oscillator
Panasonic Tantalum capacitors
Headphone Outputs: 6.35mm single ended, 4.4mm & 4pin XLR Balanced
Pre-amp outputs: RCA & XLR Outputs
Digital input: USB, Coaxial, optical, LAN and external driver USB slot
Digital output: Coaxial & Optical
Output power:
Single ended 6.35mm – 540mW @ 32Ohm
Balanced – 1620mW @ 32Ohm
Wireless connection:
Wifi 2.4 & 5G
Support DLNA and AIrplay
Two-way Bluetooth 4.2, with LDAC support
Audio support:
PCM 32/384
DSD256 native, DSD512 software
8x MQA
Compatibility:
In order for 2yu to inherit streaming/music transport capabilities or function as an audio interface, a connection with 2go is required.
Power supply:
Micro USB (5v 1amp minimum required) – through 2go
PCM and DSD support:
44.1kHz – 768kHZ | DSD 64 to DSD 256 (Dependant on output)
Sample rate converter:
Integrated, automatic downsampling is provided if a higher sample rate is being played than the output can support.
Digital audio outputs:
USB Type-A (44.1kHz – 768kHz / DSD 256)
BNC Coax (44.1kHz – 192kHz /DSD 64)
RCA Coax (44.1kHz – 192kHz /DSD 64)
Optical (44.1kHz – 192kHz / DSD 64)
Processing power:
2000MIPS
Weight with 2go:
361g
Dimensions with 2go:
115mm (H) x 100mm (W) x 22mm (D)
Input voltage | DC 9V/1.8A-15V/0.8A AC 100 -240V, 50/60Hz |
Input | Wi-Fi / Ethernet / USB HDD
(Firmware updates via OTA and USB-C at rear) |
Formats | PCM384 DSD256 (MQA-fully compatible) |
Output | USB3.0 (Type-A Socket) x2 SPDIF (Coaxial) |
Power consumption | No Signal ~6W Max Signal ~10W |
Dimensions | 158 x 100 x 35 mm 6.2″ x 3.9″ x 1.4″ |
Net weight | 578g (1.14 lbs) |
一般說明 | 數模轉換器 |
DAC | ESS Sabre32參考ES9018K2M |
採樣率 | 光學,同軸:192kHz; USB:384kHz DSD64,DSD128,DSD256 |
數字輸入 | 同軸,光學,USB micro-B PC / Android, USB-A for iOS,藍牙 |
數字輸出 | 同軸,光學 |
輸出電壓 | 5Vrms±0.1 |
頻率響應 | 20Hz〜20KHz(±0.2dB) |
信噪比 | 115dB(A加權) |
電池 | 鋰離子型DC 3.7V 5000mAh |
播放時間 | 長達7小時 |
尺寸(mm) | 34mm x 136mm x 178mm |