Inputs | Wi-Fi Ethernet (M12 X-code 8-pin/RJ45/Optical) USB-A and USB-C (front panel) (USB DISK, HDD etc.) |
Formats | DSD: up to 512 / 22.6MHz PCM: up to 768kHz MQA: Full Decoder |
Analogue output | Balanced 4.4mm 4V RMS / UnBAL RCA 2V RMS |
Digital output | USB-C (front panel) USB3.0 Type-A Socket x2 (USB2.0 compatible) S/PDIF Optical (PCM up to 192kHz, 24-bit) S/PDIF Coaxial (PCM up to 192kHz, 24-bit) AES/EBU (XLR – single link, PCM up to 192kHz) I2S via HDMI connector Pinout: 1) Data – 2) Gnd 3) Data + 4) Bck + 5) Gnd 6) Bck 7) Wck – 8) Gnd 9) Wck + 10) Mck + 11) Gnd 12) Mck 13,14,15,16) DSD Enable; L=PCM, H=DSD 17) Gnd 18) 5V Power Enable Output; L=O, H=On 19) N/C 20,21,22,23) GND |
Output Impedance | Balanced: ≤74Ω UnBAL: ≤37Ω |
SNR | <-106dB(A) @ 0dBFS (BAL/UnBAL) |
THD + N | <0.0025% @ 0dBFS (BAL/UnBAL) |
Power supply requirement | DC 9V/2.0A, 12V/1.8A, 15V/1.2A* (centre pin +) |
Power consumption | <0.5W idle, 14W max. |
Dimensions | 214 x 151 x 41 mm (8.4″ x 5.9″ x 1.6″) |
Net weight | 1.0 kg (2.26 Ibs) |
Limited Warranty | 12 months** |
*A power supply unit must be able to deliver minimum rated repetitive current **12 months typical or as permitted/required by local reseller laws. ***Specifations are subject to change without notice. |
Specification
Dimensions: 252 x 188 x 67.5 mm
Weight: 3.2kg
Display: 5.8-inch 1920*1080 IPS Touch screen
System: Based on Android 10, Closed and Customized
Hi-Res Support: Up to PCM 32bit / 768 kHz & DSD512
Bluetooth: Version 5.0, serving as both Receiver and transmitter
BT codec support: Receiver LDAC & SBC // Transmitter LDAC, aptX-HD, aptX, SBC
Wi-Fi: Dual band 2.4G & 5G
DAC: ESS ES9038Pro
Analog Section: OPA1611 based I/V conversion, OPA2211 based LPF, OPA2211+BD139+BD140 based Amplifier
Analog outputs: 4.4mm & XLR balanced, 3.5mm & 6.35mm Single-ended, with pair of RCA and XLR
Digital outputs: SPDIF Coaxial & Optical, USB Audio Output
Digital inputs: USB-B, Coaxial SPDIF & Optical, 2x USB port for USB drives, MicroSD card slot
Output power Single Ended: Up to 8.5V / 2.3W @ 32 Ohm // 9V / 270mW @ 300 Ohm
Output power Balanced: Up to 15V / 7W @ 32 Ohm // 18V / 1W @ 300 Ohm
Output Impedance: 1.2 Ohm SE // 2.4 Ohm BAL
Balanced THD+N: 0.0003%
Balanced Dynamic Range: 125 dB
Balanced SNR: 125 dB
Balanced Channel separation: 104dB
Line I/O: | 0 / 2 channels (sym XLR), 0 / 2 channels (unsym. RCA) |
SPDIF I/O: | 1 / 1 (RCA) |
AES / EBU I / O: | 1 / 0 (XLR) |
TOSLink I/O: | 1x Input |
Sample frequency: | max. 192 kHz |
Resolution: | 32 Bit |
Frequency response: | 4 Hz – 53 kHz (-0.5 dB) |
Input sensitivity: | 200 mV |
Input impedance: | 75 Ohm (SPDIF) _ 110 Ohm (AES/EBU) |
Output impedance: | < 1 Ohm |
max. output level: | +21 / +15 / +9 / +3 dBu (selectable) |
Signal to Noise Ratio (SNR): | 120 dB |
Crosstalk: | -125 dB |
Interface: | USB (optional) |
Extras: | optional USB interface available |
Power supply: | 230 V / 115 V AC |
Casing: | desktop |
Dimensions: | 168 x 49 x 145 mm (WxHxD) |
Mass: | 1.10 kg |
4 digital inputs:
– AES/EBU, XLR, transformer balanced
according to AES-3, impedance 110 ohms
– S/P-DIF, Cinch, unbalanced, according to
IEC 958 / AES-3-id, impedance 75 ohms
– TOS-Link according to EIAJ RC-5720
– USB 24 bit, up to 192 kHZ