Specification
Dimensions: 252 x 188 x 67.5 mm
Weight: 3.2kg
Display: 5.8-inch 1920*1080 IPS Touch screen
System: Based on Android 10, Closed and Customized
Hi-Res Support: Up to PCM 32bit / 768 kHz & DSD512
Bluetooth: Version 5.0, serving as both Receiver and transmitter
BT codec support: Receiver LDAC & SBC // Transmitter LDAC, aptX-HD, aptX, SBC
Wi-Fi: Dual band 2.4G & 5G
DAC: ESS ES9038Pro
Analog Section: OPA1611 based I/V conversion, OPA2211 based LPF, OPA2211+BD139+BD140 based Amplifier
Analog outputs: 4.4mm & XLR balanced, 3.5mm & 6.35mm Single-ended, with pair of RCA and XLR
Digital outputs: SPDIF Coaxial & Optical, USB Audio Output
Digital inputs: USB-B, Coaxial SPDIF & Optical, 2x USB port for USB drives, MicroSD card slot
Output power Single Ended: Up to 8.5V / 2.3W @ 32 Ohm // 9V / 270mW @ 300 Ohm
Output power Balanced: Up to 15V / 7W @ 32 Ohm // 18V / 1W @ 300 Ohm
Output Impedance: 1.2 Ohm SE // 2.4 Ohm BAL
Balanced THD+N: 0.0003%
Balanced Dynamic Range: 125 dB
Balanced SNR: 125 dB
Balanced Channel separation: 104dB
Item number: | 1008175 |
color | schwarz |
housing | Desktop |
power supply | Internal 230 V / 115 V AC |
headphone Out | 1 (Pentaconn, symmetrisch), 1x (4-pol. XLR, symmetrisch), 1x (6,3 mm Klinke, unsymmetrisch) |
port: | USB 2.0 |
color: | black |
headphone Out: | 1 (bal., XLR 4-pole), 2 |
housing: | Desktop |
bit depth: | 32 Bit |
amplifier channels: | 2 |
sample rate: | max. 384 kHz |
dimensions: | 290 x 80 x 248 mm (W x H x D) |
SABRE32 Ultra DAC (ES9016S x 2)
USB輸入 (PCM):44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz (16, 24, 32bit)
USB輸入 (DSD):2.8MHz, 5.6MHz
同軸 / 光纖 / AEC / EBU輸入:32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz (16, 24bit)
非同步傳送 (Asynchronous Transfer) 減少Jitter
3種 數碼過濾模式 (SHARP / SLOW / SHORT)
Lock Range Adjust 功能可有效減低Jitter
音訊升頻 (最高至384kHz / 32-bit)
保護式變壓器 (Shield Power Transformer) 有獨立線圈,有效分隔電源、數碼及模擬部份
完全平衡 (Full Balanced) 線路設計可減低噪訊
分散式線路設計 (Discrete Circuit) 令音質處理質素提升
平衡耳機端子:XLR3 / XLR4 x 2
非平衡耳機端子:STD x 1
“Fine Adjust” 可作細微聲量調節
附有增益調校 (Gain Switch) 以切合不同阻抗的耳機
數碼隔離器 (Digital Isolator) 可減低因USB產生的雜訊
採用NEUTRIK平衡端子
XLR3 / RCA可作前級 (Pre-Amp) 功能
低重心設計配合堅固機箱增加穩定性
消耗功率:35W
尺寸 (闊 x 高 x 深):296 x 101 x 271 mm
重量 (kg):6.3kg
前置端子-耳機輸出:非平衡 (STD) x 1,平衡 (XLR3) x 1,平衡 (XLR4) x 1
後置端子-數碼輸入:USB (type B) x 1,同軸 x 2,光纖 x 2,AES/EBU (XLR3) x 1
模擬輸出:非平衡 (RCA) x 1,平衡 (XLR3) x 1 (附有輸出水平 Fix / Variable變換及相位變換)