Showing all 13 results

Show sidebar
Products 1 - 13 from 13. Products on page
Hot
Close

英國 iFi – NEO Stream 發燒級座枱式串流播放器 | Tidal, NAA, Roon Ready | M12、光纖SC、RJ45網絡接口 | I2S輸出 | 可選擇內置解碼 | WiFi 5GHz

$9,699
Inputs Wi-Fi
Ethernet (M12 X-code 8-pin/RJ45/Optical)
USB-A and USB-C (front panel) (USB DISK, HDD etc.)
Formats DSD: up to 512 / 22.6MHz
PCM: up to 768kHz
MQA: Full Decoder
Analogue output Balanced 4.4mm 4V RMS / UnBAL RCA 2V RMS
Digital output USB-C (front panel)
USB3.0 Type-A Socket x2 (USB2.0 compatible)
S/PDIF Optical (PCM up to 192kHz, 24-bit)
S/PDIF Coaxial (PCM up to 192kHz, 24-bit)
AES/EBU (XLR – single link, PCM up to 192kHz)
I2S via HDMI connector Pinout:
1) Data –
2) Gnd
3) Data +
4) Bck +
5) Gnd
6) Bck
7) Wck –
8) Gnd
9) Wck +
10) Mck +
11) Gnd
12) Mck
13,14,15,16) DSD Enable; L=PCM, H=DSD
17) Gnd
18) 5V Power Enable Output; L=O, H=On
19) N/C
20,21,22,23) GND
Output Impedance Balanced: ≤74Ω
UnBAL: ≤37Ω
SNR <-106dB(A) @ 0dBFS (BAL/UnBAL)
THD + N <0.0025% @ 0dBFS (BAL/UnBAL)
Power supply requirement DC 9V/2.0A, 12V/1.8A, 15V/1.2A* (centre pin +)
Power consumption <0.5W idle, 14W max.
Dimensions 214 x 151 x 41 mm (8.4″ x 5.9″ x 1.6″)
Net weight 1.0 kg (2.26 Ibs)
Limited Warranty 12 months**
*A power supply unit must be able to deliver minimum rated repetitive current
**12 months typical or as permitted/required by local reseller laws.
***Specifations are subject to change without notice.
Hot
Close

英國 iFi – NEO iDSD2 座枱式解碼+平衡耳擴 | 前級功能(可切換) | 支援外置鐘 | 支援最高 aptX Lossless, LDAC 藍牙接收功能

$7,199
Inputs:
Digital USB3.0 B (USB2.0 compatible); S/PDIF (coaxial/optical)
Bluetooth 5.4 (aptX Lossless, aptX Adaptive, aptx, LDAC, HWA/LHDC, AAC and SBC)
Analogue UnBAL 3.5mm
Clock: External Sync Clock 10MHz, 1Vpp nominal, 75Ω. Sinewave or Squarewave
Format: PCM 768kHz; DSD 512 (22.6MHz); MQA Full Decoder
Line Section
Outputs:
Balanced XLR 19.5V max. (variable) 4.4V­ fixed
UnBAL RCA 10.5V max. (variable) 2.2V ­fixed
Output Impedance: XLR ≤100Ω; RCA ≤50Ω
SNR: <-120dB(A) @ 0dBFS
DNR: >120dB(A) @ -60dBFS
THD+N: <0.0015% @ 0dBFS
Headphone Section
Output:
Balanced 4.4mm 3.5V / 19.5V max. (12Ω – 600Ω Headphone)
UnBAL 6.3mm 4.5V / 9.50V max. (12Ω – 300Ω Headphone)
Output Power:
Balanced >19.5V/650 mW (@ 600Ω); >13.3V/5,551 mW (@ 32Ω)
UnBAL >10.5V/184 mW (@ 600Ω); >9.5V/2,832 mW (@ 32Ω)
Output Impedance: <1Ω
SNR: >120dB(A) (3.3V 6.3mm/6.2V 4.4mm)
DNR: -120dB(A)
THD + N: <0.0015% (125mW @ 32Ω)
Power supply requirement: DC 9V/1.5A – 15V/0.9A (centre +ve)*
Power consumption: No Signal ~5W; Max Signal ~13.5W
Dimensions: 214 x 158 x 41 mm (8.4″ x 6.2″ x 1.6″)
Net weight: 916g (2.0 Ibs)
-21%
Close

英國 iFi – iDSD Diablo 發燒級手提解碼平衡耳擴 | MQA Decode

$6,999 $5,500
Digital Inputs USB 3.0 type ‘A’ (USB2.0 compatible)
S-PDIF (3.5mm coaxial/optical)
Formats supported DSD512/256/128/64
Octa/Quad/Double/Single-Speed DSD
DXD (768/705.6/384/352.8kHz)
Double/Single-Speed DXD
PCM (768/705.6/384/352.8/192/176.4/
96/88.2/48/44.1 kHz)
MQA (Decorder)
New
Close

英國 iFi – Hip-Dac3 薄型手提解碼平衡耳擴 | USB-C輸入 | 內置iEMatch | MQA Full Decoder | DSD256, 32Bit/384kHz | iEMatch32Ω@400mW, 600Ω@6.3V

$1,599
Input USB-C
Formats Supported DSD256 / PCM384kHz / Full MQA Decoder
DAC Burr Brown
Headphone Outputs 4.4mm, 3.5mm
Power Output BAL 400mW @ 32Ω; 6.3V @ 600Ω
UnBAL 280mW @ 32Ω; 3.2V @ 600Ω
SNR BAL <109dB(A) @ 0dBFS
UnBAL <103dB(A) @ 0dBFS
DNR BAL <109dB(A)
UnBAL <103dB(A)
THD + N BAL <0.006X% (360mW/2.0V @ 600Ω)
UnBAL <0.01% (100mW/1.27V @ 16Ω)
Frequency Response 20Hz – 45kHz (-3dB)
Power Consumption <2W idle, 4W max
Battery Lithium-polymer 2,200mAh
up to 12 hours
Power System Charging via USB-C, BC V1.2 compliant up to 1000mA charging current
Dimensions 102 x 70 x 14 mm (4.0″ x 2.8″ x 0.6″)
Net weight 135 g
HotNew
Close

英國 iFi – Hip-Dac2 薄型手提解碼平衡耳擴 | MQA Decoder | DSD256, 32Bit/384kHz | XMOS 16 | 32Ω@400mW

$1,399

器材規格

iFi hip-dac2
數位輸入:USB 3.0 type ‘A’ (USB2.0 compatible)
支援格式:
DSD 256/128/64、Quad/Double/Single-Speed DSD、DXD (384/352.8kHz)、PCM (384/352.8/192/176.4/96/88.2/48/44.1 kHz)、MQA (384/352.8 kHz)
頻率響應:10Hz-80kHz(-3dB)
訊噪比:-120dB(平衡)、-114dB(非平衡)
動態範圍:120dB(平衡)、114dB(非平衡)
總諧波失真:0.002%(平衡)、0.001%(非平衡)
耳機最大輸出:Balance 400 mW@ 32Ω、6.3V@600Ω、S-Balance 280 mW@ 32Ω、3.2V@600Ω
電池:鋰聚合物 2200 mAh(約 8 小時續航力)
尺寸:102 x 70 x 14 mm
重量:125 g

-29%Hot
Close

英國 iFi – Hip-Dac 薄型手提解碼平衡耳擴

$1,399 $999
Formats supported DSD256/128/64, Octa/Quad/Double/Single-Speed DSD
DXD(384/352.8kHz),
PCM(384/352.8/192/176.4/96/88.2/48/44.1kHz)
MQA
Digital Inputs USB 3.0 type ’A’
High-Speed Asynchronous USB 2.0, (32bit/384kHz)
Headphone Outputs Balanced 4.4mm
Single-Ended S-Balanced 3.5mm
Power Output 2.0V/400 mW @ 16 Ohm
Battery Lithium-polymer 2200mAh
Power System Charging via USB-C, BC V1.2 compliant up to 1000mA charging current
Power (max) <2W idle, 4W max
Dimensions 102(l) x 70(w) x 14(h) mm
Weight 125g (0.28 lbs)
New
Close

英國 iFi – 4.4mm to XLR 平衡訊號線 | OFHC銅銀 | 1M

$799
Minimum inductance and capacitance minZ™ (for: minimum impedance) helix construction Construction
Conductors 16AWG
Conductor material Heavy OFHC continuous cast copper silver matrix
Insulation RoHS compliant super-soft (60P) HD polymer
Shielding Intrinsic shielding provided by minZ™ helix construction
AC spark insulation 1500V
Connectors iFi ‘FINAL’ 4.4 and XLR connectors
Insulation resistance 100Mohm
Size 2M Wide (78.6″) fully extended // 1M (39.3″) per XLR cable
Weight 133g (0.29 Ibs)
Warranty period 12 months
Specifications are subject to change without notice
HotNew
Close

英國 iFi – 4.4 to 4.4mm 平衡訊號短線 | OFHC銅銀

$599
Construction Minimum inductance and capacitance minZ™ (for minimum impedance) helix construction
Conductors 14AWG total thickness
Conductor material Heavy OFHC continuous cast copper silver matrix
Insulation RoHS compliant super-soft (60P) HD polymer
Shielding Intrinsic shielding provided by minZ™ helix construction
AC spark insulation 1500V
Connectors iFi ‘FINAL’ 4.4 connectors
Insulation resistance 100Mohm
Length 300 mm (11.8″)
Weight 25 g (0.9 oz)
New
Close

英國 iFi – 4.4mm to XLR SE 平衡訊號線 | OFC銅 | 1M

$399
Construction Double core parallel structure
Conductors 22AWG
Conductor material OFC high conductivity oxygen-free copper conductor
Insulation RoHS compliant thermoplastic elastomer (TPE)
Impedance ≤0.08Ω
Shielding Intrinsic shielding provided by equivalent wrap-around metal mesh
AC spark insulation 1000V
Connectors Gold-plated iFi ‘FINAL’ 4.4 and XLR connectors
Insulation resistance 100 MΩ
Tensile strength 500PSI
Lengths 1.0 m (39.3”)
Net weights 110 g (0.24 lbs)
Limited Warranty 12 months