Frequency Response:
20Hz to 20kHz +/- 0.1dB
THD +N:
-127.5dB (AWT)
Channel Separation:
>125dB @ 1kHz
Dynamic Range:
127.5dB (AWT)
Headphone Output:
1% THD 6.8v RMS with 300Ω (154mW)
1% THD 6.8v RMS with 33Ω (1.4w)
Output Impedance:
0.055Ω (short circuit protected)
Operating voltage:
90v AC – 250v AV auto switching 50Hz – 60Hz
Dimensions (including connectors):
7.8cm (H) 33.5cm (W) 15.2cm (D)
Weight:
5kg
Dynamic range: 127dB ‘A’ weighted
Noise: 4 uV ‘A’ weighted (high gain), 1.7 uV ‘A’ weighted (low gain) with no measurable noise floor modulation
Distortion: 0.00008% @ 2.5 V 300Ω; 0.00016% @ 6 W 8Ω
Output power (unbalanced): (@1% THD) 288 mW RMS 300Ω; 7.3 W RMS 8Ω
Output power (balanced): (@1% THD) 1.15 W RMS 300Ω; 18W RMS 8Ω
Output impedance: 0.042Ω
Stereo separation: 9 V RMS 300Ω -138dB
Dimensions: 5.2cm (H) 23.5cm (W) 23.8cm (D)
Technical details:
Output impedance < 0,1 ohm
Maximum output current 300 mA.
Maximum output voltage JAZZ 3.7 V
Maximum output voltage JAZZ-FF 15 V @ 200 Hz
Discrete volume control. Typical stepsize 1.4 dB, 31 steps.
Gain switch. Maximum gain factors +0 / +16 dB
Crossfeed filter switch:
1. Stereo / crossfeed OFF
2. Crossfeed ON
1 pair of analog inputs
Input impedance 18 kOhm
Gold-plated input jacks.
Silver plated headphone jack (Neutrik).
Silver plated heavy duty switches
10 Watts toroidal transformer.
110V and 220V mains power switchable.
Power uptake 5 Watts
Built-in groundloop breaker.
Double regulated voltage lines.
Low impedance electrolytic buffer capacitors (Nichicon). Total Buffer capacity 39.000 uF.
Bypass capacitors in the power supply.
Polystyrol and polypropylen capacitors in the signal path.
Metalfilm resistors in the signal path.
OPA209 opamps biased into class-A.
A total of 4 BURR-BROWN BUF634 buffer amplifiers at the left, the right, and the ground output channel.
Active balanced headphone ground.
Signal paths and signal path components at the bottom side of the PCB for maximal shielding.
Sturdy anodized aluminium enclosure
Weight: 1.0 kg
Size: 22.2 x 10.6 x 6.0 cm