Specification
Dimensions:102 x 85 x 25 mm
Weight: 270.4 g
Screen:0.87-inch Screen
Audio formats: DSD(“.iso”,”.dsf”,”.dff”) / ISO / DXD / APE / FLAC / WAV / AIFF / AlF / DTS / MP3 / WMA / AAC / OGG / ALAC / MP2 / M4A / AC3 / M3U / M3U8/ OPUS
USB Input Hi-Res Support:32 bit / 768 kHz, DSD 512
MicroSD Hi-Res Support:32 bit / 384 kHz, DSD 256
Gain Setting: Three Level Setting
Storage: MicroSD Card Slot, up to 2TB
DAC:2x AKM AK4493SEQ
Digital Filters:6 Preset Filters
Bluetooth 5.0 Receiver
Bluetooth Codec Support: LDAC / AAC / SBC
Outputs:
Single-Ended Output:
Output Power: 2.7V@32Ω(227mW@32Ω)
Frequency Response:20 Hz – 40 kHz (-0.7 dB)
THD+N:0.0014%
Channel separation:80 dB @ 32 Ohm
Dynamic Range:118 dB
Signal-To-Noise:118 dB
Output Impedance:4.7 Ohm
Balanced Output:
Output Power: 5.19V@32Ω(840mW@32Ω)
Frequency Response:20 Hz – 40 kHz (-0.7 dB)
THD+N:0.0004%
Channel separation:105 dB @ 32 Ohm
Dynamic Range:121 dB
Signal-To-Noise:121 dB
Output Impedance:6.6 Ohm
Shanling H7參數規格
尺寸: 142 mm x 85 mm x 25mm
重量: 352.5g
屏幕: 1.44英寸OLED點陣顯示屏
音頻格式: DSD(“.iso”,”.dsf”,”.dff”)/DXD/APE/FLAC/WAV/AIFF/AIF/DTS/MP3/WMA/AAC/OGG/ALAC/MP2/M4A/AC3/M3U/M3U8/OPUS
*不支持iso的dst編碼
支持規格: 768 kHz/32 bit, DSD 512
增益補償: 高、中、低
存儲方式: 2T內存卡
DAC轉化芯片: AK4191EQ+AK4499EX
數字瀘波器: 6種不同的瀘波方式
藍牙版本: 5.0
藍牙編碼方式 : 藍牙接收支持: LDAC/SBC/AAC
LO輸出:
輸出電平: 2.4Vrms
頻響: 20Hz-40kHz(-0.2dB)
THD+N: 0.0006%
動態範圍: 121dB
信噪比: 121dB
輸出阻抗: 47KΩ
PO輸出:
輸出功率
低增益: 28mW@32Ω
中增益: 112mW@32Ω
高增益: 450mW@32Ω
頻響: 20Hz-40kHz(-0.2dB)
THD+N: 0.0009%
分離度: 75dB@32Ω
動態範圍: 121dB
信噪比: 121dB
低噪(low-gain)>113dB
輸出阻抗: 小於1Ω
BAL輸出:
輸出功率
低增益: 87mW@32Ω
中增益: 348mW@32Ω
高增益: 1300mW@32Ω
頻響: 20Hz-40kHz(-0.2dB)
THD+N: 0.0007%
分離度: 115dB@32Ω
動態範圍: 123dB
信噪比: 123dB
低噪(low-gain)>111dB
輸出阻抗: 小於1Ω
Line I/O: | 0 / 2 channels (sym XLR), 0 / 2 channels (unsym. RCA) |
SPDIF I/O: | 1 / 1 (RCA) |
AES / EBU I / O: | 1 / 0 (XLR) |
TOSLink I/O: | 1x Input |
Sample frequency: | max. 192 kHz |
Resolution: | 32 Bit |
Frequency response: | 4 Hz – 53 kHz (-0.5 dB) |
Input sensitivity: | 200 mV |
Input impedance: | 75 Ohm (SPDIF) _ 110 Ohm (AES/EBU) |
Output impedance: | < 1 Ohm |
max. output level: | +21 / +15 / +9 / +3 dBu (selectable) |
Signal to Noise Ratio (SNR): | 120 dB |
Crosstalk: | -125 dB |
Interface: | USB (optional) |
Extras: | optional USB interface available |
Power supply: | 230 V / 115 V AC |
Casing: | desktop |
Dimensions: | 168 x 49 x 145 mm (WxHxD) |
Mass: | 1.10 kg |
型式:DAC
晶片:Chord Electronics客製化Xilinx Artix 7 (XC7A15T) FPGA晶片
Tap長度:49,152
Pulse array:10 element pulse array design
頻率響應:20Hz – 20kHz +/- 0.2dB
輸出級:Class A
THD: <0.0001% 1kHz 3v RMS 300Ω
THD與噪訊 (3v RMS): 117dB at 1kHz 300ohms ‘A’ wighted (reference 2.5v)
2.6 uV ‘A’ weighted 噪訊:底噪低於可偵測範圍
聲道分離度:138dB at 1kHz 300Ω
重量:770g
尺寸:41mm (H) x 160mm (W) x 72mm (D)
4 digital inputs:
– AES/EBU, XLR, transformer balanced
according to AES-3, impedance 110 ohms
– S/P-DIF, Cinch, unbalanced, according to
IEC 958 / AES-3-id, impedance 75 ohms
– TOS-Link according to EIAJ RC-5720
– USB 24 bit, up to 192 kHZ
SABRE32 Ultra DAC (ES9016S x 2)
USB輸入 (PCM):44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz (16, 24, 32bit)
USB輸入 (DSD):2.8MHz, 5.6MHz
同軸 / 光纖 / AEC / EBU輸入:32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz (16, 24bit)
非同步傳送 (Asynchronous Transfer) 減少Jitter
3種 數碼過濾模式 (SHARP / SLOW / SHORT)
Lock Range Adjust 功能可有效減低Jitter
音訊升頻 (最高至384kHz / 32-bit)
保護式變壓器 (Shield Power Transformer) 有獨立線圈,有效分隔電源、數碼及模擬部份
完全平衡 (Full Balanced) 線路設計可減低噪訊
分散式線路設計 (Discrete Circuit) 令音質處理質素提升
平衡耳機端子:XLR3 / XLR4 x 2
非平衡耳機端子:STD x 1
“Fine Adjust” 可作細微聲量調節
附有增益調校 (Gain Switch) 以切合不同阻抗的耳機
數碼隔離器 (Digital Isolator) 可減低因USB產生的雜訊
採用NEUTRIK平衡端子
XLR3 / RCA可作前級 (Pre-Amp) 功能
低重心設計配合堅固機箱增加穩定性
消耗功率:35W
尺寸 (闊 x 高 x 深):296 x 101 x 271 mm
重量 (kg):6.3kg
前置端子-耳機輸出:非平衡 (STD) x 1,平衡 (XLR3) x 1,平衡 (XLR4) x 1
後置端子-數碼輸入:USB (type B) x 1,同軸 x 2,光纖 x 2,AES/EBU (XLR3) x 1
模擬輸出:非平衡 (RCA) x 1,平衡 (XLR3) x 1 (附有輸出水平 Fix / Variable變換及相位變換)
iFi nano-iOne
型式:藍牙接收DAC
輸入:USB 3.0/2.0,藍牙aptX/AAC,SPDIF RCA/Optical二合一
輸出:Coaxial SPDIF,RCA類比立體聲
支援最高格式:192kHz PCM,11.2/12.4MHz DSD,352/384kHz DXD
尺寸:100×64×25.5 mm
The TEAC UD-H01 brings high-end digital-to-analog conversion to an affordable package for component or computer audio playback. Three digital inputs are provided: coaxial, optical, and a USB 2.0 input for connection to Mac or Windows computers. These connect to a premium-quality Burr Brown PCM1795 dual DAC with up to 192kHz/32-bit audio resolution for the highest-quality sources. The device can receive data asynchronously meaning the timing signal is included reducing jitter to the absolute lowest level. Input sources can even be up-converted to higher sampling rates for smoother audio quality.
For output to powered speakers or an amplifier, a Muse 8920 dual operation line amplifier terminates to gold-plated phono or balanced XLR outputs. The output circuit is completely independent in the left and right sides for optimum channel separation and clear stereo imaging. A stereo headphone amp is also provided with independent volume control.
The perfect system for playback of high-res computer formats like FLAC, WAV and Apple Lossless, the TEAC UD-H01 enables high-quality audio playback in your home or office.